Personal exposure to PM2.5-bound heavy metals associated with cardiopulmonary function in general population

Environmental Science and Pollution Research - To better understand the cardiopulmonary alterations associated with personal exposed PM2.5-bound heavy meals, we conducted a cross-sectional study in...     

土地利用变化对流域水文过程时空分异的影响 ——以赣江流域为例

土地利用变化引起的水文分量时空变化对认识流域产汇流过程，优化流域土地利用结构和水资源规划具有重要意义。基于SWAT模型，本研究以赣江流域为例，结合1980、2000、2015年3期土地利用数据从水文响应单元的角度，系统分析了单纯土地利用变化对流域产流、蒸发、入渗以及径流等主要水文过程时空分布的影响。结果表明：1980~2015年间，流域内的土地利用变化主要表现为耕地和林地的减少，城乡建设用地的增加；林地的减少和城乡建设用地的增加是产流增加，蒸发和入渗减少的主要原因；总体上，土地利用变化对局部地区水文过程影响较大，但因土地利用类型之间的相互转化和其影响的叠加，流域尺度上的综合水文效应明显降低；土地利用变化导致整个赣江流域平均径流量增加了2.33×108m3，相比较近年来赣江径流的减小幅度其影响十分有限。近年来，赣江入湖径流量的下降主要是由气候变化和其他人类活动作用特别是流域工农业用水的大幅增长所致。流域水文过程模拟应充分考虑土地利用变化水文效应的时空分异，注重天然和社会水循环的耦合，才能更为真实的反映流域水文过程，更好的为流域土地利用结构优化和水资源的高效管理提供科学依据。     

不同喷雾方式下低阻文丘里振弦栅除尘配置优化实验研究

为了对比径向外喷和轴向喷雾下的低阻文丘里振弦栅耦合除尘效果，以除尘效率和系统阻力为参照，选定喉管气速、振弦栅数、纤维丝间隙和喉管液气比进行单因素实验。结果表明2种喷雾方式的除尘效率和系统阻力的变化趋势相同。利用SPSS软件进行4因素3水平正交实验设计，在特定参数条件下，2种喷雾方式的因素影响排序相同，除尘效率为纤维栅数＞纤维丝间隙＞喉管气速＞喷雾量；系统阻力为喉管气速＞纤维栅数＞纤维丝间隙＞喷雾量；径向外喷最佳配置为喉管气速24 m/s、喷雾量2.3 L/min、2块间隙为0.8 mm纤维栅板；轴向喷雾为喉管气速28 m/s、喷雾量2.4 L/min、2块间隙为0.8 mm纤维栅板；在最优配置下的除尘性能为径向外喷＞轴向喷雾。     

屏蔽服冷却系统对人体表面温度影响的研究*

为科学有效地论证多种方式组合的冷却屏蔽服在不同环境条件下对人体表面温度控制的效果，需要对冷却系统及人体敏感部位发热量进行客观评估。通过对5名健康男性的高温测试，探究人体在不同环境温度下体表温度的变化，得出胸部、背部及额头为热量最高部位，并构建以“人体-降温屏蔽服-外界环境”为主体的冷却系统数值模型，对不同环境中的屏蔽服冷却效果展开研究，分析穿戴冷却屏蔽服时人体躯干部分的温度分布及影响。结果表明:在屏蔽服中靠近胸部、背部部位引入相变材料和风扇，均可帮助人体降低体温，提高舒适度。     

《环境监测 分析方法标准制修订技术导则》(HJ 168—2010)对土壤环境监测标准制修订适用性探讨

针对土壤环境监测的复杂性和特殊性,从空白试验、检出限、方法验证、质量控制和标准文本等方面,指出了《环境监测分析方法标准制修订技术导则》《HJ 168—2010》对土壤环境监测标准制修订工作的适用性和执行中存在的问题。提出,为保证土壤标准制修订质量和标准执行质量,应研究适宜土壤监测方法标准的质量控制指标体系和评价体系,及时修订《HJ 168—2010》或发布补充要求;对现有土壤监测方法标准进行技术评估,加强对于土壤标准制修订工作的指导和监管。     

g-C_3N_4/C@Bi_2MoO_6复合光催化剂的制备及其光催化活性

通过水热合成法和液相沉积法制备g-C_3N_4/C@Bi_2MoO_6复合光催化剂,并采用X射线衍射、扫描电子显微镜、氮气吸脱附、紫外-可见漫反射等技术对其进行表征。研究了可见光下g-C_3N_4/C@Bi_2MoO_6催化降解罗丹明B(Rh B)的影响因素,并对其光催化反应机理进行初步探讨。实验结果表明:g-C_3N_4掺杂量为60%(w)时g-C_3N_4/C@Bi_2MoO_6的光催化活性最高;在60%g-C_3N_4/C@Bi_2MoO_6的投加量为1.00 g/L、初始Rh B质量浓度为2.50 mg/L、可见光照射150 min的条件下,Rh B的降解率达到97.90%;在g-C_3N_4/C@Bi_2MoO_6光催化降解体系中,h~+和·O_2~-是主要活性物种。     

Health risk assessment of heavy metals in Cyprinus carpio (Cyprinidae) from the upper Mekong River

The purposes of this research are to quantify the concentration of heavy metals (Zn, Cu, As, Pb, Cd, and Hg) in the water and fish tissues of common carp (Cyprinus carpio) in the upper Mekong River and to thereby elucidate the potential dietary health risks from fish consumption of local residents. Surface water and fish tissues (gill, muscle, liver, and intestine) from four representative sample areas (influence by a cascade of four dams) along the river were analyzed for heavy metal concentrations. Results revealed that the levels of heavy metals in fish were tissue-dependent. The highest Cu and As levels were found in the liver; the highest Zn and Pb levels occurred in the intestine, and the highest Hg level was found in the muscle. The total target hazard quotient (THQ) value for residents is > 1 for long-term fish consumption, and local residents are, therefore, exposed to a significant health risk. Results from the current study provide an overall understanding of the spatial and tissue distribution of heavy metals in water and fish body along the upper Mekong River under the influence of cascade dams and highlight the potential health risk of As for the local residents of long-term fish consumption.

     

Effects of Compounded Curing Agents on Properties and Performance of Urea Formaldehyde Resin

The effects of three compounded curing agents on the properties and performance of the urea-formaldehyde (UF) resin were investigated in this study. The compounded curing agents were prepared by mixing ammonium chloride with hexamethylenetetramine, citric acid, and oxalic acid respectively at a ratio of 1:1, named N-H, N–CA, and N–OA, respectively. The curing process, crystallinity, and physical properties were measured, and the three-ply plywood was fabricated to measure its prepress strength, wet shear strength, and formaldehyde emission. Results showed that the compounded curing agents N–CA and N–OA enhanced the initial viscosity, crosslinking density and thermal stability of UF resin. Additionally, the prepress strength of the plywood bonded by UF resin with N–CA and N–OA increased by 82 and 111% respectively compared to the UF resin with NH₄Cl, and the wet shear strength increased by 14 and 16%, the formaldehyde emission decreased by 19 and 42% respectively. However, owing to the short pot-life of these curing agent limited their storage time, the curing agents N–CA and N–OA should be applied to fabricate plywood in winter for obtaining a better bond strength and a lower formaldehyde emission. While the UF resin with N–HT showed a suitable pot-life, so it could be applied to fabricate plywood in summer for long time storage and avoiding procuring problem.     

长江江苏段引航风险评价方法研究

通过分析11 a引航事故报告,运用风险耦合模型(N-K模型)表明长江江苏段引航事故是人-船-环境-管理4因素耦合作用的结果。以引航事故报告为基础,结合专家意见确定了由27个风险因素构成的引航风险评价指标体系。采用集对分析法,结合熵权法确定指标权重,建立了基于熵权集对分析法的引航风险评价模型。在实际应用方面,选取长江江苏段的9段航道为评价对象,得到了各航道的引航风险等级,验证了模型的适用性和准确性。     

我国环境监测方法标准体系的现状与发展构想

综述了我国环境监测方法标准体系的发展历程和现状,分析了环境监测方法标准在数量和内容及技术水平等方面不能满足环境管理需要、方法标准体系不健全、科学性有待提高等问题,提出加强环境监测方法标准的顶层设计、构建天地一体化的环境监测方法标准体系、实行动态管理并加强质控、加强监测科研借鉴国际经验等发展构想。